A dripping faucet isn’t just annoying—it can waste gallons of water over time. Luckily, fixing it is a straightforward DIY project.

Here’s a step-by-step guide:

1. Turn Off the Water Supply
2. Locate the shut-off valves under the sink and turn them clockwise.
3. Plug the Drain
4. Use a sink plug or rag to prevent small parts from falling down the drain.
5. Disassemble the Faucet Handle
6. Remove decorative caps, unscrew the handle, and expose the cartridge or washer.
7. Inspect the Washer or Cartridge
8. Worn-out washers or cartridges are the most common cause of leaks. Replace with a matching part.
9. Reassemble the Faucet
10. Put everything back in order, tighten screws, and ensure the handle moves smoothly.
11. Turn On the Water & Test
12. Slowly reopen the valves and check if the leak is gone.

Pro Tip: Keep a small plumbing toolkit handy—adjustable wrench, screwdriver set, and replacement washers.